1 - 1 Protective and organization Briefcase.
2 - 1 Switchboard with VGA connection..
3 - 1 VGA sensor connections + cables + watertight sensor connections.
4 - 1 Fuel Sensor + cable + three-pin watertight connection.
5 - 1 Pressure, temperature and humidity Sensor + cable + four-pin watertight connection.
6 - 1 EGT temperature sensor + nut to solder the exhaust + cover screw + cable + 2 pin watertight with yellow connection.
7 - (only if you have purchased the version CHT) 1 CHT temperature Sensor (14 mm) + cable + 2-pin watertight with green connection (see other spark plugging measurements).
8 - (only if you have purchased H2O version) 1-H2O temperature Sensor + cable + 2 pin watertight with blue connection (see options for pipe connection measures).
9 - Revolution Counter Sensor + cable + 1 pin watertight with red connection.
10 - Ground Cable + terminals + 1 pin watertight with black connection.
11 - Connectors + 3 Cable connections to a 12 V external battery + terminals.
12 - 2x screw clamps with plastic from 12/14/16 mm each, screws for clamps, flanges, various heat shrinks, a cordura cover for cables and several ones for the correct assembly.
13 - Installation and operation manual.
1.1 - CHT Version
1.2 - H2O Version
If you have chosen the H2O Version
1.2.1 - Choose Tube Measurement : 16 - 18 - 22 m.m
1.2.2 - Choose other Measurement - Tell in order comments
2.1 - Consumption LESS than < 6 Liters / Gallons x hour
2.2 - Consumption MORE than > 6 Liters / Gallons x hour
3.1 - NO - I do not want battery
3.2 - Yes - I want Battery PXP Meter 3800 mha
3.3 - Yes - I want battery PXP Meter 6500 mha
4.1 - Mounted on Motorcycle
4.2 - Mounted on Boat
4.3 - Mounted on Kart
4.4 - Mounted on Quard
4.5 - Mounted on Buggy
4.6 - Mounted on Powered Flight (Paramotor + Paratrike) / (Ultralight + Plane)
4.7 - Another type of Motor - Vehicle
Click in + to Open